Zig zag paver block Quantity calculation

Zig Zag paver block

To calculate the quantity of zigzag paver blocks needed for a 1000 sq.ft area, you'll need to follow these steps:

  1. Determine the Size of the Paver Block:

    Find out the dimensions of the zigzag paver block. Let's assume the size is 8 inches by 4 inches.

  2. Convert Square Feet to Square Inches:

    Since 1 square foot is equal to 144 square inches (12 inches * 12 inches), for a 1000 sq.ft area, you have: 1000sq.ft×144sq.in/sq.ft=144,000sq.in

  3. Calculate the Area Covered by One Paver Block:

    For an 8x4 inch paver block, the area covered by one block is: 8inches×4inches=32sq.in

  4. Determine the Number of Paver Blocks:

    Divide the total area (144,000 sq.in) by the area covered by one paver block (32 sq.in): 144,000sq.in32sq.in/block4,500blocks

Watch the detailed video here to get more information about step-by-step 
procedure for Zig Zag paver block quantity calculation.

So, for a 1000 sq.ft area with 8x4 inch zigzag paver blocks, you would need approximately 4,500 blocks. Remember that this is a general calculation, and actual requirements may vary based on factors like wastage, pattern complexity, and specific block dimensions. Purchasing a little extra is always advisable to account for any unexpected issues during installation.

Post a Comment