Monday, 6 June 2016

What is membrane curing?


Sometimes, concrete works are carried out in places where there is acute shorting of water. the lavish application of water for water curing is not possible for reason of economy.

It has been pointed out earlier that curing does not mean only application of water, it means also creation of condition for promotion of uninterrupted and progressive hydration.

Membrane curing is a good method of maintaining a satisfactory state of wetness in the body of concrete to promote satisfactory state of wetness in the body of concrete to promote condition hydration when original water/cement ratio used is not less that 0.5. to achieve best result, membrane is applied after one or two days of actual wet curing.

Since no replenishing of water is done after the membrane has been applied it should be ensure that the membrane is of good quality and it is applied effectively. two or three coats may be requires for effective sealing of the surface to prevent the evaporation of the water.

when water proofing paper or polyethylene paper are used care must be taken to see that these are not punctured anywhere and also whether adequate lapping is given at the junction and this is effectively sealed.

2 comments:

  1. image is most important for better understanding

    ReplyDelete
  2. image is most important for better understanding

    ReplyDelete